Reliability model and algorithm research on HVDC system and flexible HVDC system

The Journal of Engineering

Yuanzhao Han¹  Zhong Zheng¹  Yuqin Wang¹  Cunbin Li²  Tao Zhang³ 

[1] Beijing Key Laboratory of High Voltage and EMC, North China Electrical Power University;Institute of Economics and Management, North China Electric Power University;State Grid Economic and Technological Research Institute Co. Ltd.;

关键词: failure analysis;    power transmission control;    invertors;    rectifying circuits;    power transmission reliability;    commutation;    HVDC power transmission;    output voltage;    flexible HVDC system;    control systems;    high-voltage direct current system;    reliability model;    degrees of freedom;    phase angle;    amplitude angle;    commutation failure;    rectifier;    inverter;    state enumeration method;    economic characterisation;   

DOI  :  10.1049/joe.2018.8912

来源: DOAJ

【 摘 要 】

The main difference between flexible high-voltage direct current (HVDC) system and the traditional HVDC system is that there are two control degrees of freedom in the flexible HVDC system that is the amplitude and phase angle of the output voltage. While, there is only one control degrees of freedom in the traditional HVDC system which is the amplitude of the output voltage. Therefore, compared with the traditional HVDC system, there will not be the problem of commutation failure in the flexible HVDC system, and the control systems of the rectifier side and the inverter side being operated independently make the reliability of the system greatly improved. This article analyses and compares the main methods of reliability assessment. Analysing and comparing the reliability parameters of the two systems by using the state enumeration method, and using the economic characterisation to make the comparison more intuitive.

【 授权许可】

Unknown