Numerical Simulation of Melt Filtration Process

Communications

Marek Bruna¹  Dana Bolibruchova¹  Petr Prochazka² 

[1] Department of Technological Engineering, Faculty of Mechanical Engineering, University of Zilina, Slovakia;Keramtech, s.r.o., Zacler, Czech Republic;

关键词: filtration;    numerical simulation;    aluminium alloys;   

DOI  :  10.26552/com.C.2016.1A.70-74

来源: DOAJ

【 摘 要 】

The paper aims to comprehensively elaborate the impact of ceramic filter design on filling parameters during the casting of aluminium alloys. Experimental work focuses mainly on the evaluation of velocity, filling time and turbulences in the close vicinity of the filter by numerical simulation. The whole experiment was divided into two stages: in the first stage was evaluated set of three filters with different channels cross-section geometry, and in the second stage was evaluated set composed of four filters with different number of channels and channels diameter.

【 授权许可】

Unknown