期刊论文详细信息
Energies
Using High-Bandwidth Voltage Amplifier to Emulate Grid-Following Inverter for AC Microgrid Dynamics Studies
Rick Scharrenberg1  Tomi Roinila2  Roni Luhtala2  Tuomas Messo3  Alejandra Fabian4  Erik de Jong4  Yin Sun4  Paolo Mattavelli5  Tommaso Caldognetto5 
[1] DNV-GL, 6812 Arnhem, The Netherlands;Department of Automation and Hydraulics, Tampere University of Technology, 33720 Tampere, Finland;Department of Electrical Energy Engineering, Tampere University of Technology, 33720 Tampere, Finland;Department of Electrical Engineering, Eindhoven University of Technology, 5600 Eindhoven, The Netherlands;Department of Management and Engineering, University of Padova, 35121 Padova, Italy;
关键词: DC-AC power converters;    impedance emulation;    stability analysis;    power-hardware-in- the-loop;   
DOI  :  10.3390/en12030379
来源: DOAJ
【 摘 要 】

AC microgrid is an attractive way to energize local loads due to remotely located renewable generation. The AC microgrid can conceptually comprise several grid-forming and grid-following power converters, renewable energy sources, energy storage and local loads. To study the microgrid dynamics, power-hardware-in-the-loop (PHIL)-based test setups are commonly used since they provide high flexibility and enable testing the performance of real converters. In a standard PHIL setup, different components of the AC microgrid exist as real commercial devices or electrical emulators or, alternatively, can be simulated using real-time simulators. For accurate, reliable and repeatable results, the PHIL-setup should be able to capture the dynamics of the microgrid loads and sources as accurately as possible. Several studies have shown how electrical machines, dynamic RLC loads, battery storages and photovoltaic and wind generators can be emulated in a PHIL setup. However, there are no studies discussing how a three-phase grid-following power converter with its internal control functions should be emulated, regardless of the fact that grid-following converters (e.g., photovoltaic and battery storage inverters) are the basic building blocks of AC microgrids. One could naturally use a real converter to represent such dynamic load. However, practical implementation of a real three-phase converter is much more challenging and requires special knowledge. To simplify the practical implementation of microgrid PHIL-studies, this paper demonstrates the use of a commercial high-bandwidth voltage amplifier as a dynamic three-phase power converter emulator. The dynamic performance of the PHIL setup is evaluated by identifying the small-signal impedance of the emulator with various control parameters and by time-domain step tests. The emulator is shown to yield the same impedance behavior as real three-phase converters. Thus, dynamic phenomena such as harmonic resonance in the AC microgrid can be studied in the presence of grid-following converters.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次