Analysis Of Deformation And Microstructural Evolution In The Hot Forgingof The Ti-6Al-4V Alloy

Archives of Metallurgy and Materials

Kukuryk M.¹ 

[1]CZĘSTOCHOWA UNIVERSITY OF TECHNOLOGY, FACULTY OF MECHANICAL ENGINEERING AND COMPUTER SCIENCE, 21 ARMII KRAJOWEJ 2AV., 42-200 CZĘSTOCHOWA, POLAND

关键词: Hot forging;    Titanium alloy;    Finite element method;    Microstructure evolution;   

DOI  :  10.1515/amm-2015-0286

来源: DOAJ

【 摘 要 】

The paper presents the analysis of the three-dimensional strain state for the cogging process of the Ti-6Al-4V alloy using the finite element method, assuming the rigid-plastic model of the deformed body. It reports the results of simulation studies on the metal flow pattern and thermal phenomena occurring in the hot cogging process conducted on three tool types. The computation results enable the determination of the distribution of effective strain, effective stress, mean stress and temperature within the volume of the blank. This solution has been complemented by adding the model of microstructure evolution during the cogging process. The numerical analysis was made using the DEFORM-3D consisting of a mechanical, a thermal and a microstructural parts. The comparison of the theoretical study and experimental test results indicates a potential for the developed model to be employed for predicting deformations and microstructure parameters.

【 授权许可】

Unknown