New jitter-aware network coding approach for packet selection in wireless mesh network using Jacobsen algorithm

Management Science Letters

关键词: Coding model;    Network coding;    Quality of service;    Source routing algorithm;    Wireless networks;   

DOI  :  10.5267/j.msl.2014.11.009

来源: DOAJ

【 摘 要 】

Network coding (NC) is an approach for increasing the throughput of communication networks. NC has been derived from the idea of combining packets and forwarding them to achieve higher throughputs. From the very beginning, NC has attracted the attentions of scholars since they could improve the throughput of wired networks. Previous works have focused on the improvement of network throughput. Some methods add artificial delay to send packets. The methods are used in order to gain coding time and to increase throughput but they could not be used in immediate applications. However, early packets dispatch or adding delay to packets, for increasing coding time, can influence on the jitter of sent data. On the other hand, jitter is an important parameter in determining multimedia broadcasting time. Unlike previous methods, this paper provides a jitter-based coding algorithm using Jacobsen method. In the proposed method, the selection priority is based on packets jitter so that a packet with the minimum jitter is considered as the first priority for coding. Related computations are performed through Jacobson algorithm. According to simulation results, selecting a proper coding pattern for jitter can improve jitter by 30% while the throughput of this method shows no considerable change compared with that of available methods.

【 授权许可】

Unknown