Effect of Boron Sinter-Aid on the Microstructure and Properties of Austenitic Stainless Steel- TIB2 Composites / Wpływ Dodatku Boru Na Mikrostrukturę I W Łaściwosci Kompozytów Stal Austenityczna-TIB2

Archives of Metallurgy and Materials

Karwan-Baczewska J.¹  Sulima I.²  Jaworska L.² 

[1] AGH University of Science and Technology, Faculty of Non-Ferrous Metals , Al. A. Mickiewicza 30, 30-059 Krakow, Poland;Pedagogical University, Institute of Technology, 2 Pod chorążych str., 30-084 Krakow , Poland;

关键词: HP-HT sintering;    boron;    AISI316L matrix composite;    TiB2;    physico-mechanical properties;   

DOI  :  10.1515/amm-2015-0423

来源: DOAJ

【 摘 要 】

In the work, the effect the boron addition on the microstructure and properties of the composites with austenitic steel of matrix was investigated. The composites were consolidated using the high pressure-high temperature (HP-HT) method. Two composite types were fabricated, i.e. steel with 8 vol.% TiB2 and steel with 8 vol.% TiB2 and 1 vol.% boron. Density of sintered materials was measured according to the Archimedes principle. Mechanical properties were determined by Vickers microhardness and compression test. The wear resistance was investigeted using ball-on-disc method. The microstructure of composites was analyzed using a scanning electron microscope.

【 授权许可】

Unknown