Enhancing Heat Treatment Conditions of Joints in Grade P91 Steel: Looking for More Sustainable Solutions

Metals

AntónioP. Pinho¹  OlgaC. Paiva¹  FranciscoJ. G. Silva¹  VitorF. C. Sousa¹  AntónioB. Pereira² 

[1] ISEP—School of Engineering, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal;TEMA—Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal;

关键词: P91 steel;    welding;    TIG process;    heat-treatment;    PWHT;    mechanical strength;   

DOI  :  10.3390/met11030495

来源: DOAJ

【 摘 要 】

Grade P91 is a relatively new class of steel, which has received special attention from designers because it presents extremely interesting characteristics for specific applications. This steel exhibits ideal properties for demanding applications, especially involving high temperature and pressure, being employed in facilities such as power plants and other equipment, such as heat exchangers. P91 welds usually need heat treatments, which are already parameterized in the codes. However, standardized treatments are time-consuming and harmful to the environment, as they massively consume energy. Some attempts have been made in the past to reduce the time and energy spent on these treatments. This work aims to extend this study, now presenting better solutions than those obtained previously. This work presents four new conditions for the heat treatment of joints carried out on P91 steel, with a view to reducing processing time, reducing energy consumption, and an even better balance between mechanical strength and elongation after failure. Heat treatment conditions were established in which there was a loss of about 14% in Ultimate Tensile Strength (UTS), but in which a gain of about 50% in elongation was obtained, compared to welding without any treatment, but also with 10% losses in the UTS and 30% gains in elongation when compared to the solution recommended as more correct in the codes, saving a lot of time and energy in the treatment process. Thus, these solutions may be adopted in the future with gains in terms of productivity and economic and environmental sustainability.

【 授权许可】

Unknown