Thermal-Aware Synthesis of 5G Base Station Antenna Arrays: An Overview and a Sparsity-Based Approach

IEEE Access

Yanki Aslan¹  Jan Puskely¹  Alexander Yarovoy¹  Antoine Roederer¹  Marcel Geurts²  J. H. J. Janssen² 

[1] Department of Microelectronics, Microwave Sensing, Signals and Systems Group, Delft University of Technology, Delft, The Netherlands;NXP Semiconductors, Nijmegen, The Netherlands;

关键词: Antenna synthesis;    base station antennas;    fifth generation (5G);    millimeter-wave communications;    passive cooling;    sparse arrays;   

DOI  :  10.1109/ACCESS.2018.2873977

来源: DOAJ

【 摘 要 】

Heat removal capabilities and radiation performances of several sparse antenna array topologies are studied for cooling enhancement in 5G millimeter-wave base station antennas. Both electromagnetic (EM) and thermal aspects are jointly considered for the first time in array layout optimization, and a novel connection between layout sparsity and thermal management is presented. Two types of active electronically scanned arrays (AESAs), based on the traditional and planar approaches, are examined. Thermal management in AESAs is discussed, with a focus on cooling challenges at millimeter waves. Being relatively low cost and low profile while supporting flexible beamforming, passively cooled planar AESAs with fanless CPU coolers are proposed, for the first time, to be used in 5G base stations. Additional cooling for such arrays is achieved by increasing the inter-element distances in the layout. Linear irregular arrays, spiral arrays, thinned arrays, circular ring arrays, and heat sink antenna arrays are revisited with a critical discussion on their EM and thermal performance. The results are compared with regular and square layouts that are used as benchmarks throughout this paper.

【 授权许可】

Unknown