期刊论文详细信息
Forests
Quality and Bending Properties of Scots Pine (Pinus Sylvestris L.) Sawn Timber
Piotr Mańkowski1  Sławomir Krzosek1  Marek Grześkiewicz1  Izabela Burawska-Kupniewska1 
[1] Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences—SGGW, Nowoursynowska 159, 02-776 Warsaw, Poland;
关键词: scots pine timber;    visual grading;    strength grading;   
DOI  :  10.3390/f11111200
来源: DOAJ
【 摘 要 】

The paper presents the partial research results of a mechanical properties study conducted on Scots pine from the Silesian Forestry Area in Poland. The scope of research included the visual strength grading of the timber according to the PN-D-94021:2013 standard, mechanical testing (according to EN 408:2012) and an attempt to assign visuals to the C strength classes. The EN 1912: 2012 standard assigns the visual sorting classes of individual wood species (according to national sorting standards) to the C strength classes introduced by the EN 338: 2018 standard. At the moment, this standard does not assign Polish visual sorting classes (KW, KS, and KG) to C strength classes. The obtained MOE (modulus of elasticity) and MOR (static bending strength) values were corrected according to the EN 384:2018 standard, and their characteristic values were later calculated. On this basis, we proposed a classification of the grading classes determined on the basis of PN-D-94021 into C classes described in EN 338:2018, which is necessary in the process of the transposition of Polish strength grades (KW, KS, KG, and Reject) and the qualification of them in line with EN 1912:2012. The calculated characteristic values of density, MOR and E0 (the modulus of elasticity parallel to the grain) allowed us to assign Polish visual grades KW, KS, and KG to C35, C30, and C20, respectively. The pine timber under research had high physical and mechanical parameters, which translated into high C classes to which the KW, KS, and KG timber categories were assigned.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:1次