Effect of shot peening at different almen intensities on fatigue behavior of AISI 304

Metalurgija

F. F. Utomo¹  P. T. Iswanto¹  H. Akhyar² 

[1] Department of Mechanical and Industrial Engineering, Gadjah Mada University, Jl. Grafika No.2, Yogyakarta, 55281, Indonesia;Department of Mechanicall Engineering, Syiah Kuala University, Jl. Syech Aburrauf No.7, Darussalam, Banda Aceh, 23111, Indonesia;

关键词: AISI 304;    shot peening;    surface;    hardness;    fatigue crack growth rate;   

DOI  :  

来源: DOAJ

【 摘 要 】

AISI 304 stainless steel is a common material that is widely used in the extensive implant industry. The failure of this material, especially in bone implant applications, is affected by its fatigue load. The purpose of the present experiment is to improve fatigue crack growth resistance and surface hardness in AISI 304 by using a shot peening metal treatment with varying Almen intensities. In this experiment, specimens of AISI 304 underwent a shot peening treatment and then subjected to surface fatigue failure. The results of this experiment show that shot peening with an Almen intensity of 0,005 achieved a 192,3 % increase in fatigue life compared to a non-treatment material, with a fatigue life of 127 700 cycles (Paris constant C, n is 1x10^-11 and 3,5, respectively). The surface hardness reached HV 429,63.

【 授权许可】

Unknown