Dissipated power and induced velocity fields data of a micro single dielectric barrier discharge plasma actuator for active flow control

Data in Brief

L. Francioso¹  D.S. Martínez²  A. Ficarella³  M.G. De Giorgi³  E. Pescini³ 

[1] CNR-IMM, Istitute for Microelettronics and Microsystems, Via per Monteroni, 73100 Lecce, Italy;Universidad Politécnica de Cartagena, Dep. Ingeníeria Térmica y de Fluidos, c/Dr. Fleming s/n, 30202 Cartagena, Murcia, Spain;University of Salento, Department of Engineering for Innovation, Via per Monteroni, 73100 Lecce, Italy;

关键词: Micro SDBD;    Plasma induced velocity;    PIV measurements;    DBD CFD modeling;    Wall jet;   

DOI  :  10.1016/j.dib.2015.08.011

来源: DOAJ

【 摘 要 】

In recent years, single dielectric barrier discharge (SDBD) plasma actuators have gained great interest among all the active flow control devices typically employed in aerospace and turbomachinery applications [1,2]. Compared with the macro SDBDs, the micro single dielectric barrier discharge (MSDBD) actuators showed a higher efficiency in conversion of input electrical power to delivered mechanical power [3,4]. This article provides data regarding the performances of a MSDBD plasma actuator [5,6]. The power dissipation values [5] and the experimental and numerical induced velocity fields [6] are provided. The present data support and enrich the research article entitled “Optimization of micro single dielectric barrier discharge plasma actuator models based on experimental velocity and body force fields” by Pescini et al. [6].

【 授权许可】

Unknown