Novel reclosure scheme of MMC-HVDC system based on characteristic signal injection

The Journal of Engineering

Shi Guang¹  Lei Wu²  Ting Wang²  Guobing Song²  Han Wei³  Liu Chao³ 

[1] Rundian Energy Science and Technology Co., LTD;School of Electrical Engineering, Xi'an Jiaotong University;State Grid Henan Electric Power Research Institute;

关键词: power transmission lines;    HVDC power transmission;    power transmission faults;    power transmission protection;    power engineering computing;    HVDC power convertors;    fault diagnosis;    HVDC transmission lines;    injection method;    sound pole;    electrode coupling characteristics;    coupling characteristic signal;    fault property;    fault existence;    disappearance states;    MMC-HVDC system;    characteristic signal injection;    AC line;    temporary faults;    permanent faults;    coupling relationship;    fault phase;    sound phase;    DC network;    DC system;    DC line fault;    fault pole;    fault identification method;    DC fault line;   

DOI  :  10.1049/joe.2018.8869

来源: DOAJ

【 摘 要 】

Adaptive reclosing of AC line discriminates temporary faults and permanent faults by the coupling relationship between fault phase and the sound phase. While in the DC network, the electrical quantity of the DC system keeps constant after the DC line fault is cleared, and there is no coupling relationship between the sound and fault pole. This paper presents a fault identification method by injecting characteristic signals into a DC fault line. The electrode coupling characteristics of HVDC transmission lines, the injection method, and the selection of characteristic signal are given in detail. Then, the characteristic signals are injected into the sound pole through the additional control strategy of the converter station. As of electrode coupling characteristics of transmission lines, the fault line induces the coupling characteristic signal. This characteristic signal on the fault line is used to distinguish the fault property by the differences of the propagation feature between the two states, the fault existence and disappearance states. The simulation results verify the effectiveness of the method here.

【 授权许可】

Unknown