Determination of drying behaviour in industrial type convectional dryer and mathematical modelling

Thermal Science

Akan Ahmet Erhan¹  Ozkan Derya Burcu² 

[1] Namık Kemal University, Çorlu Vocational School, Department of Machinery, Tekirdağ, Turkey;Yıldız Teknik University, Mechanical Engineering Department, İstanbul, Turkey;

关键词: drying;    mathematical modeling;    stenter;    diffusion model;    heat and mass transfer;   

DOI  :  10.2298/TSCI180315244A

来源: DOAJ

【 摘 要 】

In this study, the performance of a stenter (ram machine) that enables the drying of textile products with hot air is theoretically modelled with a diffusion model derived from Fick’s second law. The experimental study was conducted in a 10 chamber stenter with three different drying temperatures (110-130-150°C) and three different fabric speeds (10-20-30 m per minute.) by using a fabric consisting of 95% cotton + 5% lycra. The drying behaviour of the dryer was determined by utilizing the data obtained from the studies. With the help of the utilized model, the values of diffusion coefficients and activation energies were obtained, the conformity of data between the model and the experimental studies were compared by using regres

【 授权许可】

Unknown