Corrosion Resistance of Novel Fly Ash-Based Forsterite-Spinel Refractory Ceramics

Materials

Radomír Sokolář¹  Martin Nguyen¹ 

[1] Faculty of Civil Engineering, Institute of Technology of Building Materials and Components, Brno University of Technology, Veveri 331/95, 602 00 Brno, Czech Republic;

关键词: forsterite;    spinel;    fly ash;    corrosion resistance;    refractory ceramics;   

DOI  :  10.3390/ma15041363

来源: DOAJ

【 摘 要 】

This article aims to investigate the corrosion resistance of novel fly ash–based forsterite–spinel (Mg₂SiO₄-MgAl₂O₄) refractory ceramics to various corrosive media in comparison with reactive alumina–based ceramics. Because fly ash is produced in enormous quantities as a byproduct of coal-burning power stations, it could be utilized as an affordable source of aluminum oxide and silicon oxide. Corrosion resistance to iron, clinker, alumina, and copper was observed by scanning electron microscope with an elemental probe. The influence on the properties after firing was also investigated. Fly ash–based and reactive alumina–based mixtures were designed to contain 10%, 15% and 20% of spinel after firing. Raw material mixtures were sintered at 1550 °C for two hours. X-ray diffraction analysis and scanning electron microscopy were used to analyze sintered samples. The apparent porosity, bulk density, modulus of rupture, and refractory and thermo–mechanical properties were also investigated. The experimental results disclosed that the modulus of rupture, thermal shock resistance and microstructure were improved with increasing amounts of spinel in the fired samples. An analysis of the transition zones between corrosive media and ceramics revealed that all mixtures have good resistance against corrosion to iron, clinker, aluminum and copper.

【 授权许可】

Unknown