Porous SiC ceramics fabricated by quick freeze casting and solid state sintering

Progress in Natural Science: Materials International

关键词: SiC;    Quick freezing;    Liquid nitrogen;    Uniform pore structure;    Solid state sintering;   

DOI  :  10.1016/j.pnsc.2017.04.006

来源: DOAJ

【 摘 要 】

Porous SiC ceramics with uniform microstructure were fabricated by quick freezing in liquid nitrogen and solid state sintering. Poly (vinyl alcohol) (PVA) was added as binder and pore morphology controller in this work. The microstructure and mechanical properties of porous SiC ceramics could be controlled by the composition of the aqueous slurries. Both solid content of the slurries and PVA content impacted on the pore structures and mechanical properties of the porous SiC ceramics. The solid content of slurries and PVA content varied from 60 to 67.5 wt% and 2–6 wt%, respectively. Besides, the grain morphology of ceramics was also tailored by changing the sintering temperature from 2050 to 2150 °C. Porous SiC ceramics with an average porosity of 42.72%, flexural strength of 59.28 MPa were obtained at 2150 °C from 67.5 wt% slurries with 2 wt% PVA.

【 授权许可】

Unknown