期刊论文详细信息
FME Transactions
Residual strength estimation and damage characterization by acoustic emission of drilled thermally conditioned fiberglass laminates
Pavlović A.1  Arumugam V.2  Durga S.2  Saravanakumar K.2  Kakkassery Joseph J.2  Santulli C.3 
[1] Alma Mater Studiorum University of Bologna, Italy;Anna University, Madras Institute of Technology, Chennai, India;Università degli Studi di Camerino Ascoli Piceno, Italy;
关键词: acoustic emission;    thermal conditioning;    flexural properties;    delamination;    debonding;   
DOI  :  
来源: DOAJ
【 摘 要 】

Structural components of composite materials in aerospace industries are assembled using fasteners, installed by performing cutting processes, such as drilling, on the material. In composites, this is considered particularly critical, because delamination due to mechanical stresses and fiber/resin pullout may be facilitated during cutting, so that the structural integrity of composite laminates may be affected. Acoustic emission (AE) technique is employed to monitor the failure modes and damage mechanism of drilled composite materials, while in an attempt to improve the strength of the composites, thermal conditioning has been applied. This paper investigates the residual performance of drilled unidirectional glass fiber reinforced plastic (GFRP) laminates subjected to various thermal conditioning methods. Thermally treated laminates underwent three-point flexural tests under AE monitoring to compare their residual strength with the untreated ones. The results clearly show that the thermal conditioning could be used as an effective method for minimizing delamination in GFRPs.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次