DC-side synchronous active power control of two-stage photovoltaic generation for frequency support in Islanded microgrids

Energy Reports

Jikai Chen¹  Yang Zhou²  Cheng Zhong³  Zhanjie Liu³ 

[1] Corresponding author.;Renewable Energy Technology, Ministry of Education (Northeast Electric Power University), Jilin, 132012, China;;Key Laboratory of Modern Power System Simulation and Control &

关键词: Active power control;    Two-stage PV generation;    Frequency regulation;    Power reserve control;    Islanded microgrid;   

DOI  :  

来源: DOAJ

【 摘 要 】

Virtual synchronous generator control (VSG) is an attractive method for the grid-tied inverter to provide inertia and frequency support. However, it brings some troubles on DC-link voltage control when it is applied to two-stage photovoltaic (PV) power generation. This study proposes a DC-Side synchronous active power Control for two-stage photovoltaic (PV) power generation without energy storage. Synchronous active power Control is applied to DC–DC converters, while the grid-tied inverter still maintains the DC-link voltage constant. The DC–DC converters flexibly regulate active power to provide the simultaneous inertial and primary frequency response like a synchronous generator. A simple sensorless iterative maximum power estimation method is introduced and integrated into the DC-side VSG strategy. It can estimate a rough MAP based on one sample point and converge to an accurate value along with the VSG control. The effectiveness and advantages of the control strategy are validated through case studies on an islanded microgrid that included PV generations with a DC-bus collection system. The results show that the proposed strategy significantly improves the frequency nadir and the steady frequency and maintains DC-link voltage stability during irradiance change conditions.

【 授权许可】

Unknown