Electrospun Nafion®/Polyphenylsulfone Composite Membranes for Regenerative Hydrogen Bromine Fuel Cells

Materials

Ryszard Wycisk¹  Jun Woo Park¹  Peter N. Pintauro¹  Venkata Yarlagadda²  Trung Van Nguyen² 

[1] Department of Chemical and Biomolecular Engineering, Vanderbilt University, Nashville, TN 37235, USA;Department of Chemical and Petroleum Engineering, University of Kansas, Lawrence, KS 66045, USA;

关键词: proton conducting membrane;    electrospinning;    Nafion;    polyphenylsulfone;    redox flow battery;    regenerative fuel cell;    hydrogen fuel cell;    bromine;   

DOI  :  10.3390/ma9030143

来源: DOAJ

【 摘 要 】

The regenerative H2/Br2-HBr fuel cell, utilizing an oxidant solution of Br2 in aqueous HBr, shows a number of benefits for grid-scale electricity storage. The membrane-electrode assembly, a key component of a fuel cell, contains a proton-conducting membrane, typically based on the perfluorosulfonic acid (PFSA) ionomer. Unfortunately, the high cost of PFSA membranes and their relatively high bromine crossover are serious drawbacks. Nanofiber composite membranes can overcome these limitations. In this work, composite membranes were prepared from electrospun dual-fiber mats containing Nafion® PFSA ionomer for facile proton transport and an uncharged polymer, polyphenylsulfone (PPSU), for mechanical reinforcement, and swelling control. After electrospinning, Nafion/PPSU mats were converted into composite membranes by softening the PPSU fibers, through exposure to chloroform vapor, thus filling the voids between ionomer nanofibers. It was demonstrated that the relative membrane selectivity, referenced to Nafion® 115, increased with increasing PPSU content, e.g., a selectivity of 11 at 25 vol% of Nafion fibers. H2-Br2 fuel cell power output with a 65 μm thick membrane containing 55 vol% Nafion fibers was somewhat better than that of a 150 μm Nafion® 115 reference, but its cost advantage due to a four-fold decrease in PFSA content and a lower bromine species crossover make it an attractive candidate for use in H2/Br2-HBr systems.

【 授权许可】

Unknown