Anelastic Behaviour of Commercial Die-Cast Magnesium Alloys: Effect of Temperature and Alloy Composition

Materials

Hua Qian Ang¹ 

[1] School of Engineering, RMIT University, Melbourne, VIC 3000, Australia;

关键词: magnesium alloys;    anelasticity;    mechanical properties;    elastic modulus;    yield strength;    die casting;   

DOI  :  10.3390/ma14237220

来源: DOAJ

【 摘 要 】

The anelastic deformation, resulting from partial reversal of {10$\overline{1}$2} twinning, is studied at room temperature to 150 °C on several commercial die-cast magnesium alloys for the first time. The magnitude of anelastic strain decreases with increasing temperature. For inter-alloy comparison, AZ91 shows the largest maximum anelastic strain, while AM40 and AM60 show similar maximum anelastic strain. The phenomenon is discussed in terms of solid solution softening and hardening of slip planes and how they influence twinning. T5-aged AE44 consistently shows smaller magnitude of anelasticity compared to as-cast AE44, suggesting that the precipitates formed during ageing may decrease the twin-boundary mobility and further suppress untwinning. Presence of anelasticity poses a challenge to yield strength measurement using the conventional 0.2% offset method, and a more accurate and consistent method of using a higher offset strain or a lower modulus is proposed in this study.

【 授权许可】

Unknown