Cushioning energy absorption of paper corrugation tubes with regular polygonal cross-section under axial static compression

Science and Engineering of Composite Materials

Guo Yanfeng¹  Fu Yungang¹  Kang Jianfen¹  Li Qiong¹  Lv Yabo¹ 

[1] Faculty of Printing, Packaging Engineering and Digital Media Technology, Xi’an University of Technology, Xi’an710048, Shaanxi Province, China;

关键词: paper corrugation tube;    axial static compression;    folding model;    deformation mode;    cushioning energy absorption;    mean crush force;   

DOI  :  10.1515/secm-2021-0003

来源: DOAJ

【 摘 要 】

The paper corrugation tube is an innovative kind of energy absorbing structure and shock absorber which can play an important role on the cushioning energy absorption for airdrop equipments and transportation packaging. The deformation characteristics and failure modes of the regular triangle, quadrangle, pentagon and hexagon paper corrugation tubes were comparatively studied by a series of axial static compression experiments, the cushioning energy absorption was evaluated by the seven characteristic parameters (e.g. initial peak force, mean crush force, total energy absorption, specific energy absorption, crush force efficiency, unit area energy absorption and stroke efficiency), and the influences of tube direction, cross-sectional shape, tube length and compression rate on failure modes and cushioning energy absorption were analyzed and compared. These researches showed that the tubes along X direction only have the accordion deformation mode, yet the tubes along Y direction have four deformation modes including steady state progressive buckling, Euler buckling, angular tear and transverse shear. For the paper corrugation tubes along Y direction, the cross-sectional shape has obvious influence on the cushioning energy absorption of structures, and the specific energy absorption and unit area energy absorption of regular triangle and pentagon tubes are better than those of the tubes with regular quadrilateral and hexagonal cross-section at compression rates of 12 and 48mm/min. The tube length of 150 mm or compression rate of 72 mm/min would cause the increase of contribution proportion of non-ideal deformation mode and the decrease of cushioning properties. The paper corrugation tubes along X direction have more stable and controllable deformation mode, yet the paper corrugation tubes along Y direction have better cushioning energy absorption.

【 授权许可】

Unknown