Dual space vector PWM technique for a three-phase to five-phase quasi Z-source direct matrix converter

Automatika

S. Manivannan¹  N. Saravanakumar²  K. N. Vijeyakumar² 

[1] Department of Electrical and Electronics Engineering, Bannari Amman Institute of Technology, Erode, India;Department of Electronics and Communication Engineering, Dr Mahalingam College of Engineering Technology, Coimbatore, India;

关键词: Direct matrix converter;    modulation index;    PWM techniques;    quasi Z-source DMC;    variable frequency;   

DOI  :  10.1080/00051144.2022.2078945

来源: DOAJ

【 摘 要 】

This article proposes a dual space vector PWM control technique for a three-phase to five-phase quasi Z-source direct matrix converter (QZSDMC). The proposed circuit consists of a quasi-impedance source network along with a five-phase traditional matrix converter. With the observation of bidirectional operating capability and the utilization of shoot-through duty ratio, the proposed converter can ensure both buck and boost operations. This converter overcomes the voltage transfer ratio restriction and poor voltage regulation of the traditional matrix converter. Also, this converter ensures continuous input current with an absence of input LC filter components. The proposed direct AC to AC power converter gives an alternate solution to the multiphase drive system instead of the traditional voltage source inverter. The developed dual space vector PWM control technique for three-phase to five-phase voltage conversion is derived from the basic space vector PWM approach. The proposed dual space vector PWM technique utilizes 90 active states and 3 zero vector states among 243 switching states. The QZSDMC has been analysed with a dual space vector PWM approach along with the distribution of shoot-through state in the zero vector. The proposed topology along with the control strategy has been simulated using MATLAB/Simulink environment.

【 授权许可】

Unknown