Does Tree Architectural Complexity Influence the Accuracy of Wood Volume Estimates of Single Young Trees by Terrestrial Laser Scanning?

Forests

Werner Härdtle¹  Carsten Hess¹  Goddert von Oheimb²  Anne Bienert³ 

[1] Faculty of Sustainability, Institute of Ecology, Leuphana University Lüneburg, Scharnhorststr.1, Lüneburg 21335, Germany;Institute of General Ecology and Environmental Protection, Technische Universität Dresden, Pienner Straße 7, Tharandt 01737, Germany;Institute of Photogrammetry and Remote Sensing, Technische Universität Dresden, Helmholtzstraße 10, Dresden 01069, Germany;

关键词: bounding box;    structural complexity;    tree architecture;    xylometric measurement;    young trees;   

DOI  :  10.3390/f6113847

来源: DOAJ

【 摘 要 】

Accurate estimates of the wood volume or biomass of individual trees have gained considerable importance in recent years. The accuracy of wood volume estimation by terrestrial laser scanning (TLS) point cloud data may differ between individual trees due to species-specific differences in tree architecture. We selected three common and ecologically important central European deciduous tree species, which differ considerably in tree architectural complexity in early ontogenetic stages: Acer pseudoplatanus (simple), Sorbus aucuparia (intermediate) and Betula pendula (complex). We scanned six single young trees for each species (18 trees in total) under optimal scan conditions (single tree stand, leafless state, four scanning positions, high resolution). TLS-based volume estimates were derived for the total tree as well as for the two compartments; trunk and branches, using a voxel-based bounding box method. These estimates were compared with highly accurate xyolmetric (water displacement) volume measurements. Coefficients of determination between xylometric measurements and bounding box estimates were very high for total trees (R2adj = 0.99), trunks (R2adj = 0.99), and high for branches (R2adj = 0.78). The accuracy of estimations for total tree and trunk volume was highly similar among the three tree species. In contrast, significant differences were found for branch volume estimates: the accuracy was very high for Sorbus aucuparia, intermediate for Betula pendula, and low for Acer pseudoplatanus. A stepwise multiple regression showed that the accuracy of branch volume estimates was negatively related to the number of thefirst-order branches within diameter sizes of D ≤ 5 mm and crown surface area(R2adj = 0.61). We conclude that the accuracy in total tree and trunk volume estimates was not affected by the studied types of tree architectural complexity. The impact of the structural variability of branches and occlusion by branches was, thus, not as high as expected. In contrast, the accuracy of branch volume estimates was strongly influenced by tree architectural complexity, though not in a simple way. Because underestimations originated from different sources, the accuracy of branch volume estimates cannot be directly derived from the degree of architectural complexity. These results imply that the voxel-based bounding box method provides highly accurate total tree and trunk volume estimates, whereas further research is needed to improve branch volume estimation for young trees of different architectural types.

【 授权许可】

Unknown