On the strain gradient bending deformations

Journal of the Mechanical Behavior of Materials

Lazopoulos Anastasios K.¹  Lazopoulos Konstantinos A.² 

[1] Mathematical Sciences Department, Hellenic Army Academy, Vari 16673, Greece;School of Mathematical Sciences (SEMFE), National Technical University of Athens, 5 Heroes of Polytechnion Avenue, Athens 15573, Greece;

关键词: bending;    buckling;    gradient elasticity;   

DOI  :  10.1515/jmbm-2013-0006

来源: DOAJ

【 摘 要 】

Bending deformations are reviewed in the context of strain gradient linear elasticity, considering the complete set of strain gradient components. It is well understood that conventional bending deformations depend on the collective uniaxial extension of axial fibers resulting in the dependence on the curvature of the neutral geometry of various (linear or surface) structures. Nevertheless, the deformation of each fiber depends not only on the local curvature of the neutral geometry but also on the distance of the fiber from the neutral axis. Hence, the strain gradient tensor of the conventional bending strain should include not only components along the neutral axis but also those on the transverse direction. The problems of bending and buckling, along with geometrically non-linear and post-critical behavior, are reviewed in the context of strain gradient elasticity considering not only conventional bending strain but also the complete components of the strain gradient.

【 授权许可】

Unknown