OPTIMIZATION OF TEMPERATURE HARDENING FOR IMPROVING THE HEAT RESISTANCE OF TOOL STEEL 4Х5MФ1С IN VARIOUS WORKPIECES. PART 2. THE CHOICE OF THE MODE OF HARDENING STEEL 4Х5MФ1С TO INCREASE THE HARDNESS AND HEAT RESISTANCE AFTER TEMPERING

Litʹë i Metallurgiâ

V. N. Fedulov¹ 

[1] Belarusian National Technical University;

关键词: tool steel;    casting;    forging;    hardening;    high-temperature tempering;    hardness;    structure;   

DOI  :  10.21122/1683-6065-2017-3-70-77

来源: DOAJ

【 摘 要 】

A new mode of heat treatment, including oil quenching from temperature 1150 °C with tempering at 500–650 °С for 1,5 hours was developed. The effect of increasing the level of hardening and the heat resistance is determined by more complete dissolution of the steel matrix, the coarsening of grains and morphology of the primary phase of the structure and as a result of high temperature heating and increasing of the number of secondary phases as a result of the tempering. The results of the work could be used in production of working parts is highly resourceful tool for heat forming.

【 授权许可】

Unknown