Empirical Formulae for The Calculation of Austenite Supercooled Transformation Temperatures

Archives of Metallurgy and Materials

Trzaska J.¹ 

[1] SILESIAN UNIVERSITY OF TECHNOLOGY, INSTITUTE OF ENGINEERING MATERIALS AND BIOMATERIALS, 18A KONARSKIEGO STR., 44-100 GLIWICE, POLAND;

关键词: CCT diagram;    modeling;    heat treatment;    steel;   

DOI  :  10.1515/amm-2015-0029

来源: DOAJ

【 摘 要 】

The paper presents empirical formulae for the calculation of austenite supercooled transformation temperatures, basing on the chemical composition, austenitising temperature and cooling rate. The multiple regression method was used. Four equations were established allowing to calculate temperature of the start area of ferrite, perlite, bainite and martensite at the given cooling rate. The calculation results obtained do not allow to determine the cooling rate range of ferritic, pearlitic, bainitic and martensite transformations. Classifiers based on logistic regression or neural network were established to solve this problem.

【 授权许可】

Unknown