Experimental study of corrosion behavior between the material-type and process-type super-high sucker rod steels in a near neutral high sulfide environment

Journal of Materials Research and Technology

Zhiming Yin¹  Xiaoguang Huang²  Yanqun Yu³ 

[1] College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao, 266580, China;Key Laboratory of Deepwater Engineering, CNOOC Research Institute Ltd, Beijing, 100027, China;National Engineering Laboratory of Offshore Geophysical and Exploration Equipment, China University of Petroleum, Shandong, 266580, China;

关键词: Electrochemical measurements;    EMPA;    EDX;    XRD;    Corrosion mechanism;   

DOI  :  

来源: DOAJ

【 摘 要 】

Corrosion behavior of material-type (HL) and process-type (HY) super-strength sucker rod steels 11Mn2SiCrMoA (BZ-11H) and 30CrMoA in a high sulfide-containing solution is investigated by electrochemical measurement, weight loss method, electron probe micro analysis (EPMA), energy dispersive X-ray (EDX) and X-ray diffraction (BZ-11H) analysis, respectively. The results show that BZ-11H steel has a higher corrosion resistance than 30CrMoA in the near neutral high sulfide environment. EDX and XRD analysis results indicate that the corrosion processes of these two materials are mainly controlled by the small amount of alloy elements they contain, which also determine the contents of corrosion product deposits and the difference in corrosion rates. The interactions between Fe, SO42−, CO2 and O2 lead to the formation of FeS, FeCO3 and Fe2O3, and consequently cause the difference in corrosion rate or corrosion resistance.

【 授权许可】

Unknown