Sensors Auto-calibration Method - Using Programmable Interface Circuit Front-end

Sensors

关键词: sensors calibration;    sensors interfacing;    signals processing;    measurement errors;   

DOI  :  10.3390/s31000491

来源: DOAJ

【 摘 要 】

In this paper we present a standard auto-calibration method of sensors. The purpose is to correct the accumulated errors at the sensor output. A universal conditioning circuit is used with the sensor, and the transfer function of the measurement chain is periodically corrected according to the progressive correction method. References physical inputs are used to allow the adjustment of the measurement and to calculate the calibration coefficients. Test results obtained using this method present a considerable enhancement of the measurement accuracy and a good handling of cross-sensitivity problem.

【 授权许可】

Unknown