Assessment on the Optimum Performance of a Novel 3 Axes Micro EDM Developed for Commercial Applications

Journal of Mechanical Engineering

Venkatesh Raja K¹  Suresh P² 

[1] Sona College of Technology, Department of Mechanical Engineering, Salem – 636 005, Tamil Nadu, India;Sona College of Technology, Department of Mechatronics Engineering, Salem – 636 005, Tamil Nadu, India;

关键词: material removal rate;    tool wear rate;    multi-objective optimization;    genetic algorithm;    3 axes microedm;   

DOI  :  10.2478/scjme-2021-0037

来源: DOAJ

【 摘 要 】

A low cost three axes commercial microEDM machine has been developed indigenously in order to implement precision micromachining. The developed microEDM consists of various components such as machining chamber, X-Y table, tool feed and tool holder assembly, dielectric circulation system, power supply and automatic driving devices to control the spark gap distance. The setup is capable of performing the 8µm movement in Z-axis.The developed 3 axes machine and the commercial available machine are investigated with the most important process parameters such as Current, Pulse on time and Pulse off time in order to study the Material Removal Rate (MRR) and Tool Wear Rate (TWR). The material chosen for the current research is Stainless Steel 316L, which has high corrosion resistance and the electrode was tungsten 300µm. In most of the experiments, the developed machine has performed with 6.52% higher MRR and 26.10% Lower TWR. This is due to the effective spark gap circuit developed with the use of hall current sensor.The mathematical model of MRR and TWR are obtained by correlating the process parameter using Response Surface Methodology (RSM).The chosen objectives are contradictory in nature, we employ a non-dominated Genetic algorithm to find the optimal process parameters. The developed 3 axes microEDM has yield a 10.14% and 33.12% better performance on optimum maximum MRR and minimum TWR respectively when compared to the commercial machine.

【 授权许可】

Unknown