The Formation and Evolution of Shear Bands in Plane Strain Compressed Nickel-Base Superalloy

Metals

Degui Liu¹  Jinshan Li²  Liang Cheng²  Bin Tang²  Hongchao Kou²  Lin Xiang² 

[1] AVIC Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China;State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China;

关键词: alloys;    hot working;    compression and shear;    deformation;   

DOI  :  10.3390/met8020141

来源: DOAJ

【 摘 要 】

The formation and evolution of shear bands in Inconel 718 nickel-base superalloy under plane strain compression was investigated in the present work. It is found that the propagation of shear bands under plane strain compression is more intense in comparison with conventional uniaxial compression. The morphology of shear bands was identified to generally fall into two categories: in “S” shape at severe conditions (low temperatures and high strain rates) and “X” shape at mild conditions (high temperatures and low strain rates). However, uniform deformation at the mesoscale without shear bands was also obtained by compressing at 1050 °C/0.001 s−1. By using the finite element method (FEM), the formation mechanism of the shear bands in the present study was explored for the special deformation mode of plane strain compression. Furthermore, the effect of processing parameters, i.e., strain rate and temperature, on the morphology and evolution of shear bands was discussed following a phenomenological approach. The plane strain compression attempt in the present work yields important information for processing parameters optimization and failure prediction under plane strain loading conditions of the Inconel 718 superalloy.

【 授权许可】

Unknown