Duty Ratio Modulation Strategy to Minimize Torque and Flux Linkage Ripples in IPMSM DTC Systems

IEEE Access

Xinghua Wang¹  Yunlu Li²  Sen Tan³  Dazhi Wang³  Xiaoming Yan³  Shuai Zhou³  Tianqing Yuan³  Xingyu Wang³ 

[1] Physical Education Department, School of Humanities & Law, Northeastern University, Shenyang, China;School of Electrical Engineering, Shenyang University of Technology, Shenyang, China;School of Information Science and Engineering, Northeastern University, Shenyang, China;

关键词: Direct torque control (DTC);    interior permanent magnet synchronous motor (IPMSM);    torque and flux linkage ripples;    duty ratio modulation strategy;   

DOI  :  10.1109/ACCESS.2017.2732683

来源: DOAJ

【 摘 要 】

The active vector effects on torque and flux linkage are different in interior permanent magnet synchronous motor (IPMSM) systems at different times under direct torque control (DTC). These different effects may cause overcompensation or undercompensation to torque and flux linkage leading to large torque and flux linkage ripples in the IPMSM DTC systems. A novel duty ratio modulation strategy for the IPMSM DTC systems is presented, which considers these differences that are ignored in conventional duty ratio modulation strategies. The proposed duty ratio modulation strategy aims at minimizing torque ripple and flux linkage ripple, which makes sure that the control system can work in an optimum state. The active angle, the impact angle, the active factor, and the impact factor are first introduced. The active angel and the impact angle are used to get the active factor and the impact factor, respectively. Every sector is divided into five small sectors based on the impact angels, and then, a switching table is redesigned according to the small sectors division. Also, the vector selection rules for the redesigned switching table are described in details. Subsequently, an optimal duty ratio can be derived through the simplified duty ratio determination method. Finally, the effectiveness of the proposed novel modulation strategy is verified through the experimental results on a 100-W IPMSM drive system.

【 授权许可】

Unknown