Physical investigation on the behaviours of voussoir beams

Journal of Rock Mechanics and Geotechnical Engineering

Derek Apel¹  Wei Victor Liu²  Les Jozef Sudak³  Zhaoyuan Chu³  Chaoshi Hu³ 

[1]Corresponding author.

[2]Department of Mechanical and Manufacturing Engineering, University of Calgary, Calgary, T2N 1N4, Canada

[3]School of Mining and Petroleum Engineering, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, T6G 1H9, Canada

关键词: Voussoir beam;    Stress distribution;    Image correlation;   

DOI  :  

来源: DOAJ

【 摘 要 】

It is important to understand the behaviour of voussoir beams in the design of underground excavations. There are a large number of discrepancies between the results obtained by different researchers so far. To resolve these discrepancies, physically testing the stress distribution at the midspan and abutment of voussoir beam is the key. In this paper, a simple two-block voussoir beam was built with loading system. The displacement and strain of the voussoir beam were measured by a digital image correlation system. The strain distribution along the joints of voussoir beams was firstly revealed. Then, the relationship between transverse load and midspan displacement of voussoir beam was presented. It is found that the stress distributions at the midspan and abutment are different both in shape and depth. The stress distribution is changing as the loading changes as well.

【 授权许可】

Unknown