Comparing Coupled and Decoupled Steering Interface Designs for Emergency Obstacle Evasion

IEEE Access

Nadine Sarter¹  Yidu Lu¹  Akshay Bhardwaj²  R. Brent Gillespie²  Selina Pan³ 

[1] Department of Industrial and Operations Engineering, University of Michigan, Ann Arbor, MI, USA;Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI, USA;Toyota Research Institute, Los Altos, CA, USA;

关键词: Advanced driver assistance systems;    human-automation interaction;    human factors;    intelligent transportation systems;    shared control;    steering systems;   

DOI  :  10.1109/ACCESS.2021.3106225

来源: DOAJ

【 摘 要 】

Automatic evasive steering maneuvers can outperform human-initiated steering maneuvers in emergency situations. A steering interface that decouples the steering wheel from the tires may enhance the efficiency of automatic steering maneuvers by providing full authority to the automation system. Yet, an alternative interface in which the steering wheel remains coupled to the tires has the advantages of enabling the driver to intervene in the event of an automation failure and preventing the human factors issues associated with decoupling the driver. In this paper, we present a driving simulator study with 64 participants where we compared four steering interface design schemes in their ability to enable successful obstacle evasion in emergency scenarios. The steering wheel was either decoupled from the tires and the automation was given full authority, or the steering wheel was coupled to the tires and the automation was provided high, low or no authority. The automation was designed to avoid all obstacles, except for the last one when it failed unexpectedly. Results uncovered a design tradeoff: as the authority of an agent (driver or automation) increases, the protection against the agent’s faults (provided by the other agent) reduces. The results also show that decoupled driving reduced driver’s vigilance and mode awareness and deprived the drivers of the authority required to intervene during automation faults. Coupled driving alleviated these issues but caused driver discomfort when designed with high automation authority and resulted in a larger number of collisions during perfect automation operation when designed with low automation authority.

【 授权许可】

Unknown