The Effects of Defects and Damage in the Mechanical Behavior of Ti6Al4V Lattices

Frontiers in Materials

Lorna Sinclair¹  Everth Hernandez-Nava¹  Mohammad A. Khodadadi¹  Sarah N. M. Jenkins¹  Russell Goodall¹  Emily Tyrwhitt-Jones¹  Donald H. Ip²  Hassan Ghadbeigi² 

[1] Department of Materials Science and Engineering, The University of Sheffield, Sheffield, United Kingdom;Department of Mechanical Engineering, The University of Sheffield, Sheffield, United Kingdom;

关键词: Ti6Al4V;    lattices;    additive manufacture;    mechanical properties;    digital image correlation;   

DOI  :  10.3389/fmats.2019.00117

来源: DOAJ

【 摘 要 】

With recent advances in manufacturing methods for metals with defined, complex shapes, the investigation of metallic lattice materials (metals containing significant porosity with a regular arrangement of the solid, frequently in the form of thin structural members or struts) has become more common. These materials show many interesting properties, and may have the capacity to be more highly engineered and optimized for a given application than the random structures of other microcellular metals, such as metallic foams and sponges, permit. However, the novel structure brings new structure-properties correlations to bear on the mechanical behavior of the materials. This paper examines one type of lattice, made from titanium alloy (Ti6Al4V) and fabricated by Electron Beam Melting (EBM), a material which typically shows only limited plasticity on deformation. The overall mechanical response is governed by the cooperative deformation of a very large number of individual struts that make up the lattice, and thus there is great potential for significant impact from damage arising due to defects in individual struts in the assembly. We explore the effect of simulated processing defects (missing struts) on the lattice properties, and how deformation and failure is distributed across the lattice after the onset of failure. To gain knowledge of how lattices deform, samples of various geometries, designed to probe compression, indentation-compression and tension (in the form of bending) are produced and tested under Digital Image Correlation (DIC) mapping. The understanding gained here will be of great use in designing new metallic lattice structures with greater damage tolerance and resistance to failure.

【 授权许可】

Unknown