Immediate versus Delayed Force Application after Orthodontic Bonding; An In Vitro Study

Journal of Dentistry of Tehran University of Medical Sciences

关键词: Shear Bond Strength;    Universal Testing Machine;    No-Mix Composite;    Invitro Study;   

DOI  :  

来源: DOAJ

【 摘 要 】

Statement of Problem: Bracket de-bonding during initial orthodontic archwire placement immediately after bracket set up or following re-bonding a single bracket can be a clinical concern.Purpose: The aim of this in vitro study was to assess the effect of time on the shear bond strength of a no-mix orthodontic composite adhesive.Materials and Methods: Seventy freshly extracted human upper first premolars were collected and stored in normal saline solution. The teeth were cleaned, polished, and randomly separated into 7 groups of 10. First premolar mesh-backed standard edgewise brackets were bonded to all specimens using a no-mix orthodontic composite adhesive.In the first 6 groups, the brackets were de-bonded 2, 5, 10, 15, 30 and 60 minutes after the primary setting time and the shear bond strengths were determined with the Universal testing machine. The teeth in group 7 were stored in 100% humidity at 37oCfor 24 hours before de-bonding. Data were statistically analyzed with one-way ANOVA and the Duncan multiple range analyses via SPSS software.Results: The minimum shear bond strength of 14.03 MPa was observed in group 1. A statistically significant difference was found between the shear bond strength of group 1 and the other groups (P<0.05). The shear bond strength increased significantly with time up to the first 5 minutes after bonding, but did not change afterwards.Conclusion: The bracket and composite adhesive used in this study demonstrated initial bond strengths of sufficient magnitude to withstand the immediate application of orthodontic forces, even 2 minutes after the primary setting time. Therefore, the operator should not be concerned with bracket de-bonding due to primary arch wire placement during the first minutes after bracket set up or following re-bonding a single bracket.

【 授权许可】

Unknown