Perforating Gun Detonation Monitoring System Based on Tubing Vibration

IEEE Access

Yan Han¹  Kai Li²  Yuan Li³ 

[1] Key Laboratory of Information Detection and Processing in Shanxi Province, North University of China, Taiyuan, China;Key Laboratory of National Defense Science and Technology of Electronic Testing Technology, North University of China, Taiyuan, China;School of Information and Communication Engineering, North University of China, Taiyuan, China;

关键词: Vibration detection;    signal characteristics;    short-time energy;    perforating gun detonation;    tubing vibration;   

DOI  :  10.1109/ACCESS.2019.2963631

来源: DOAJ

【 摘 要 】

This paper describes a perforating gun detonation monitoring system developed to meet the need for real-time monitoring of perforation effect in the petroleum industry. A high-sensitivity acceleration sensor, serving as the response module of the physical characteristics of the tubing vibration, acquires a set of vibration signals of the whole physical process during the impact after the detonation of the shaped charge. The jump point in the monitoring process is extracted by comparing the signal's short-time energy. The amplitude, energy, and envelope characteristics of the signal are then evaluated. From the time-frequency characteristics of the tubing vibration upon the detonation of the perforating gun, a judgment is made as to whether the perforating gun has detonated. Tubing vibration experiments were conducted involving different perforating guns. The results suggested that the proposed monitoring method is able to monitor perforating guns of different shaped charges with a perforating depth between 500m-3500m and in oil wells with an inclination of 0° - 90°. As a means of vibration detection, this method also works well in other types of vibration monitoring.

【 授权许可】

Unknown