Modern Reverse Engineering Methods Used to Modification of Jewelry

Advances in Sciences and Technology

Arkadiusz Kroma¹  Oliwia Adamczak¹  Robert Sika¹  Krzysztof Grześkowiak¹  Wiesław Kuczko²  Filip Górski² 

[1] Division of Foundry and Plastic Working, Poznan University of Technology, Piotrowo 3 Str., 61-138 Poznan, Poland;Division of Production Engineering, Poznan University of Technology, Piotrowo 3 Str., 61-138 Poznan, Poland;

关键词: reverse engineering;    3d printing;    3d scan;    fdm;    dpp;    aicon;    david-sls;   

DOI  :  10.12913/22998624/128006

来源: DOAJ

【 摘 要 】

The article presents the results of research aimed at redesigning a jewelry product with the use of modern reverse engineering methods. A detailed review of the literature was made and the essence of the application of this technology in the era of Industry 4.0 was presented. 3D digitization of the research object was performed with the use of Aicon SmartSCAN-HE R8and DAVID-SLS3 scanners. The obtained better quality file was edited in Autodesk Meshmixer3.5 software. On the basis of the created model, a 3D print was made using FDM (Fused Deposition Modeling) and DPP (Daylight Polymer Printing) technology with two different materials - HIPS (High Impact Polystyrene) and photopolymer casting resin. The final stage of the work was the measurement of the surface roughness of the tin-phosphorus alloy B101 (CuSn10P) castings made using the method of investment casting.

【 授权许可】

Unknown