Numerical Simulation of Low Reynolds Number Particle-Laden Gas Jet by Vortex Method

Journal of Fluid Science and Technology

Tomomi UCHIYAMA¹  Hisanori YAGAMI² 

[1] EcoTopia Science Institute, Nagoya University;Management Office for Intellectual Property, Mie University;

关键词: vortex method;    gas-particle two-phase flow;    flow transition;   

DOI  :  10.1299/jfst.4.335

来源: DOAJ

【 摘 要 】

An air jet, which remains laminar and axisymmetric in the single-phase flow condition, is simulated numerically in the particle-laden condition. The vortex method for particle-laden gas jet proposed by the authors is employed for the simulation. An air issues with velocity U0 from a round nozzle into the air co-flowing with velocity Ua. The Reynolds number based on U0 and the nozzle diameter is 1333, the velocity ratio Ua/U0 is 0.4. Spherical glass particles with diameter 65μm are loaded at the mass loading ratio 0.025. The particle velocity at the nozzle exit is 0.68U0. The particles impose disturbances on the air and induce the three-dimensional flow, resulting in the transition from the axisymmetric flow to the non-axisymmetric one. As the particles make the air velocity fluctuation increase, the air momentum diffuses more in the radial direction, and accordingly the spread of the jet becomes larger. The abovementioned results agree well with the trend of the existing experiments. The proposed vortex method can successfully capture the flow transition caused by the particles laden on an axisymmetric air jet.

【 授权许可】

Unknown