Lithological Constraints on Borehole Wall Failure; a Study on the Pennine Coal Measures of the United Kingdom

Frontiers in Earth Science

Audrey Ougier-Simonin¹  Lorraine Field¹  Andrew Kingdon¹  Mark W. Fellgett¹  Marcus Dobbs¹  James Shreeve²  Colin N. Waters³ 

[1] British Geological Survey, Environmental Science Centre, Nottingham, United Kingdom;Geotek Ltd., Daventry, United Kingdom;School of Geography, Geology and the Environment, University of Leicester, Leicester, United Kingdom;

关键词: borehole breakouts;    lithology;    failure;    deformation;    core scanning;    petrography;   

DOI  :  10.3389/feart.2019.00163

来源: DOAJ

【 摘 要 】

Stress-related borehole deformation features have been documented across the United Kingdom, most commonly as borehole breakouts and drilling induced tensile fractures (DIFs). Recent studies using borehole imaging have allowed more detailed investigation of these features and the processes that control their formation. Within the Pennsylvanian Pennine Coal Measures Group (PCM) of the United Kingdom borehole imaging has highlighted a disproportionately high number of breakouts occurring within paleosols located immediately below coal seams. To understand the processes controlling breakout formation, a 10.5 m section of core from the Melbourne 1 borehole, incorporating a typical coal seam / paleosol sequence, was analyzed using multiple techniques including: scanning electron and optical microscopy, X-Ray Fluorescence (XRF), X-ray radiography, Point Load testing, wireline petrophysics and track-based core scanning for physical properties. Strength measurements highlight that breakouts form preferentially in poorly consolidated sediments, with low tensile strength, cross-cut by listric surfaces. The formation and termination of breakouts also corresponds to zones of diagenetic iron mineral growth with a lower propensity to fail. These coincide with greater preservation of sedimentary structures and an increase in the rock’s tensile strength; this intra-unit variation in tensile strength constrains breakout length. This demonstrates that secondary diagenetic processes, including the growth of iron minerals impose, lithological controls on the formation and length of borehole breakouts within the United Kingdom PCM.

【 授权许可】

Unknown