Spray, Combustion, and Air Pollutant Characteristics of JP-5 for Naval Aircraft from Experimental Single-Cylinder CRDI Diesel Engine

Energies

Hyungmin Lee¹ 

[1] Department of Naval Ship Handling, Republic of Korea Naval Academy, 51704 Changwon, Korea;

关键词: spray;    combustion;    air pollutant;    JP-5;    fuel injection timing;    visualization;   

DOI  :  10.3390/en14092362

来源: DOAJ

【 摘 要 】

This study was performed to analyze the spray, combustion, and air pollutant characteristic of JP-5 fuel for naval aircraft in a spray visualization system and a single-cylinder CRDI diesel engine that can be visualized. The analysis results of JP-5 fuel were compared with DF. The spray tip penetration of JP-5 showed diminished results as the spray developed. JP-5 had the highest ROHR and ROPR regardless of the fuel injection timings. The physicochemical characteristics of JP-5, such as its excellent vaporization and low cetane number, were analyzed to prolong the ignition delay. Overall, the longer combustion period and the lower heat loss of the DF raised the engine torque and the IMEP. JP-5 showed higher O₂ and lower CO₂ levels than the DF fuel. The CO emission level increased as the injection timing was advanced in two test fuels, and the CO emitted from the DF fuel, which has a longer combustion period than JP-5, turned out to be lower. NOx also reduced as the fuel injection timing was retarded, but it was discharged at a higher level in JP-5 due to the large heat release. The images from the combustion process visualization showed that the flame luminosity of DF is stronger, its ignition delay is shorter, and its combustion period is longer than that of JP-5.

【 授权许可】

Unknown