Optimisation of the Autothermal NH3 Production Process for Power-to-Ammonia

Processes

Ulrike Krewer¹  IzzatIqbal Cheema¹ 

[1] Institute of Energy and Process Systems Engineering, Technische Universität Braunschweig, 38106 Braunschweig, Germany;

关键词: haber–bosch synthesis;    autothermal reactor systems;    flexibility analysis;   

DOI  :  10.3390/pr8010038

来源: DOAJ

【 摘 要 】

The power-to-ammonia process requires flexible operation due to intermittent renewable energy supply. In this work, we analyse three-bed autothermal reactor systems for design and off-design performance for power-to-ammonia application. The five reactor systems differ in terms of inter-stage cooling methods, i.e., direct cooling by quenching (2Q), combination of indirect and direct cooling (HQ and QH) and indirect cooling (2H) with variations. At optimum nominal operation conditions, the inter-stage indirect cooling (2H) reactor systems result in the highest NH₃ production. For off-design performance analysis, NH₃ production is minimised or maximised by varying one of the following process variables at a time: inert gas, feed flow rate or H₂-to-N₂ ratio. For each variation, the effect on H₂ intake, recycle stream load and recycle-to-feed ratio is also analysed. Among the three process variables, the H₂-to-N₂ ratio provided ca. 70% lower NH₃ production and 70% lower H₂ intake than at nominal operation for all five reactor systems. Operation of autothermal reactor systems at significantly lower H₂ intake makes them reliable for power-to-ammonia application; as during energy outage period, shutdown can be delayed.

【 授权许可】

Unknown