Development of Shear Resistance Formula for the Y-Type Perfobond Rib Shear Connector Considering Probabilistic Characteristics

Applied Sciences

SyedHaider Ali Shah¹  Suro Yoon¹  Sang-Hyo Kim¹  Tuvshintur Batbold¹  Oneil Han¹ 

[1] School of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Korea;

关键词: Y-type perfobond rib shear connector;    shear resistance formula;    reduction factor;    target safety level;    basic design variables;   

DOI  :  10.3390/app11093877

来源: DOAJ

【 摘 要 】

A design shear resistance formula for Y-type perfobond rib shear connectors is proposed with the various reduction factors, which can be selected depending on the target safety level. The nominal shear resistance formula is improved based on the systematic sensitivity analysis as well as the regression fit test based on 84 push-out test results, including 15 additional push-out tests to extend the application ranges and reduce the estimation errors, compared to the formula proposed in previous studies. Some design variables are additionally included in the proposed design formula: the yield strengths of rebar and rib plate. The basic design variables in the proposed design formula are (1) number of ribs and transverse rebars, (2) concrete compressive strength, (3) rebar diameter and yield strength, and (4) rib thickness, width, height, and yield strength. The application ranges of the basic design variables are recommended for the proposed design formula. The various shear resistance reduction factors are proposed based on the probabilistic ultimate shear resistance model of Y-type perfobond rib shear connectors. The proposed procedure may be recommended to develop the design formula for shear connectors with various shapes.

【 授权许可】

Unknown