Entropy Generation through Deterministic Spiral Structures in Corner Flows with Sidewall Surface Mass Injection

Entropy

LaVar King Isaacson¹ 

[1] Mechanical Engineering, University of Utah, 2067 Browning Avenue, Salt Lake City, UT 84108, USA;

关键词: corner flow mass injection;    deterministic ordered structures;    empirical entropies;    intermittency exponents;    entropy generation rates;   

DOI  :  10.3390/e18020047

来源: DOAJ

【 摘 要 】

Results are presented for an innovative computational procedure that predicts time-dependent instabilities and deterministic ordered structures in three-dimensional steady-state laminar boundary-layer flows. The flow configuration considered is a corner flow with sidewall surface mass injection into a horizontal boundary-layer flow. The equations for the velocity fluctuations are cast into a spectral Lorenz-type format and incorporated into the overall computational procedure for the three-dimensional flow. The non-linear time-dependent solutions of the spectral equations predict deterministic spectral ordered structures within spiral structures. Spectral analysis of these fluctuating solutions yields the resulting entropy generation rates resulting from the dissipation of the ordered structures. The results for the entropy generation rates indicate the prediction of a strong burst of ordered structures within the range of injection velocities studied. This new computational method is applicable to only selected thermal design processes.

【 授权许可】

Unknown