Effects of Laser Melting Distribution on Wear Resistance and Fatigue Resistance of Gray Cast Iron

Metals

Haiyang Yang¹  Qingnian Wang¹  Hong Zhou²  Ti Zhou³ 

[1] College of Automotive Engineering, Jilin University, Changchun 130025, China;College of Material Science and Engineering, Jilin University, Changchun 130025, China;School of Mechanical Science and Aerospace Engineering, Jilin University, Changchun 130025, China;

关键词: laser melting;    biomimetic model;    brake pads;    surface wear;   

DOI  :  10.3390/met10091257

来源: DOAJ

【 摘 要 】

The coupling bionic surface is generally prepared by laser melting on the surface of a gray iron brake hub, which can allow the brake hub to achieve excellent wear resistance and fatigue resistance. The designs of most previous experiments have been based on independent units that were uniform in their distribution patterns. Although some progress has been made in the optimization of cell features, there is still room for further improvement with respect to bionics and experimental optimization methods. Here, experiments on units with non-uniform distributions of different distances were used to rearrange and combine the bionic elements. This paper is that the original uniform distribution laser melting strengthening model was designed as a non-uniform distribution model, and the heat preservation and tempering strengthening effect of continuous multiple melting strengthening on the microstructure of the melting zone is discussed. The mechanism of crack initiation and the mode of crack propagation were analyzed. The relationship between the internal stress in the melting zone and the crack initiation resistance was also discussed. In this paper, the mechanism of different spacing distribution on the surface of gray cast iron by laser remelting is put forward innovatively and verified by experiments, which provides a solid theoretical basis for the follow-up industrial application.

【 授权许可】

Unknown