Development of technology of preparation of pork semi-products with the application of low-temperature treatment

Vestnik Voronežskogo Gosudarstvennogo Universiteta Inženernyh Tehnologij

M. G. Gadjiev¹  B. A. Sultonov¹  I. Y. Levitskaya¹  M. F. Khairullin¹  E. A. Koval¹ 

[1] Moscow State University of Technology and Management named after K.G. Razumovsky (the First Cossacs University);

关键词: low-temperature processing, raw meat, meat semi-finished products.;   

DOI  :  10.20914/2310-1202-2019-2-250-256

来源: DOAJ

【 摘 要 】

The study was aimed at developing a technology for preparing various semi-finished products from pork meat using low-temperature processing "Su-Vid". The main physicochemical indicators, functional-technological and structural-mechanical characteristics of semi-finished products, the chemical composition of semi-finished products and finished products were identified and determined experimentally, and organoleptic analysis was carried out. The data indicate that the use of low-temperature processing significantly affects the characteristics of manufactured products, which improves its performance. In particular, pork semi-finished products prepared at low temperatures are characterized by the yield: steak – 93.9%, ribs – 92.6%, in comparison with the control regime, 7.5 and 6.2% higher. The complex of data obtained showed that the samples of semi-finished pork, according to the experimental regimes of heat treatment, in terms of safety, fully meet the requirements of TR TS 034/2013. Analysis of semi-finished pork products showed that products prepared using the Su-Vid technology had high organoleptic characteristics, taste and sensory characteristics. During the storage of semi-finished products, minor changes in proteins and fats, as well as organoleptic, sanitary and microbiological characteristics, took place. As a result, a bone steak was developed in the Caucasian marinade and pork ribs in the Monte Ritz marinade made using the Su-Vid technology. The results allow us to judge that this technology is quite promising and has a positive effect on the characteristics of manufactured products. The widespread introduction of this technology in the meat industry will allow the development of semi-finished products and products of high quality, nutritional and biological value compared to products manufactured by traditional methods, as well as reduce production costs.

【 授权许可】

Unknown