Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials

Materiales de Construccion

J. Aguiar¹  S. Cunha¹  A. Tadeu² 

[1] Territory, Environment and Construction Centre (C-TAC), University of Minho;University of Coimbra;

关键词: mortar;    workability;    mechanical properties;    durability;    thermal analysis;   

DOI  :  10.3989/mc.2015.07314

来源: DOAJ

【 摘 要 】

Nowadays, considering the high variety of construction products, adequate material selection, based on their properties and function, becomes increasingly important. In this research, a ranking procedure developed by Czarnecki and Lukowski is applied in mortars with incorporation of phase change materials (PCM). The ranking procedure transforms experimental results of properties into one numerical value. The products can be classified according to their individual properties or even an optimized combination of different properties. The main purpose of this study was the ranking of mortars with incorporation of different contents of PCM based in different binders. Aerial lime, hydraulic lime, gypsum and cement were the binders studied. For each binder, three different mortars were developed. Reference mortars, mortars with incorporation of 40% of PCM and mortars with incorporation of 40% of PCM and 1% of fibers, were tested. Results show that the incorporation of PCM in mortars changes their global performance.

【 授权许可】

Unknown