Scientific Opinion on the safety assessment of the process SOREPET GR based on EREMA Basic technology used to recycle post-consumer PET into food contact materials

EFSA Journal

关键词: food contact material;    plastic;    poly(ethylene terephthalate)(PET);    recycling process;    EREMA Basic;    SOREPET GR;    safety assessment;   

DOI  :  10.2903/j.efsa.2014.3636

来源: DOAJ

【 摘 要 】

This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids deals with the safety assessment of the recycling process SOREPET GR (EU register No RECYC073) which is based on the EREMA Basic technology. The input to the process is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post-consumer PET containers, mainly bottles and containing no more than 5 % PET from non-food consumer applications. In this process, washed and dried PET flakes are heated in a continuous reactor under vacuum before being extruded. Having examined the results of the challenge test provided, the Panel concluded that the continuous reactor is the critical step that determines the decontamination efficiency of the process. The operating parameters to control its performance are well defined and are temperature, pressure and residence time. Under these conditions, it was demonstrated that the recycling process is able to ensure that the level of migration of potential unknown contaminants into food is below the modelled migration of 0.1 μg/kg food derived from the exposure scenario for infants and 0.15 μg/kg food derived from the exposure scenario for toddlers. The Panel concluded that recycled PET obtained from the process is not of safety concern when used to manufacture articles intended for food contact materials applications in compliance with the conditions as specified in the conclusion of the opinion.

【 授权许可】

Unknown