Water Sorption by Different Types of Filter Media Used for Particulate Matter Collection Under Varying Temperature and Humidity Conditions

International Journal of Environmental Research and Public Health

Kamila Widziewicz-Rzońca¹  Malwina Tytła¹ 

[1] Institute of Environmental Engineering, Polish Academy of Sciences, 34 M. Skłodowska-Curie St., 41-819 Zabrze, Poland;

关键词: particulate matter;    gravimetric;    filters;    PTFE;    nylon;    glass;   

DOI  :  10.3390/ijerph17145180

来源: DOAJ

【 摘 要 】

The present study describes the effects of temperature and humidity on the level of water absorption by filter blanks most popularly used for gravimetric analyzes of particulate matter (PM) and the effects of those on the accuracy of its weight measurements. The main parts of the research quantified the effect of temperature and humidity conditions on water contents quartz fiber (Q), fiberglass (G), PTFE, and nylon (N) filters. Supplementary studies were conducted to estimate the effects of temperature, humidity and material on mass loss/gain and the shape of water retention. All chemical analyses of water contents were performed by the Karl Fischer titration method. The results indicate that quartz filters are the most susceptible to the variations in water contents under changing humidity levels and therefore, less suitable to high accuracy determinations of PM mass compared to nylon or glass filters; PTFE performed the best due to their hydrophobicity. For PM water contents determinations, the best choice of filter media is PTFE. Although many other factors determine the choice of filter type for PM analyses, the present study is an important contribution to knowledge of assessing the suitability of different types of filter material for specific measurements.

【 授权许可】

Unknown