期刊论文详细信息
Materials
Microstructure and Mechanical Properties of High Vacuum Die-Cast AlSiMgMn Alloys at as-Cast and T6-Treated Conditions
Fengzhen Sun1  Fei Liu2  Haidong Zhao2  Runsheng Yang2 
[1] Department of Mechanical Engineering, Imperial College London, Exhibition Road, London SW7 2AZ, UK;National Engineering Research Center of Near-net Shape Forming for Metallic Materials, South China University of Technology, Guangzhou 510641, China;
关键词: T6 heat treatment;    AlSiMgMn alloys;    Fracture;    In-situ SEM observation;    Microstructure;   
DOI  :  10.3390/ma12132065
来源: DOAJ
【 摘 要 】

Al−Si−Mg based alloys can provide high strength and ductility to satisfy the increasing demands of thin wall castings for automotive applications. This study has investigated the effects of T6 heat-treatment on the microstructures, the local mechanical properties of alloy phases and the fracture behavior of high vacuum die-cast AlSiMgMn alloys using in-situ scanning electron microscopy (SEM) in combination with nano-indentation testing. The microstructures of the alloys at as-cast and T6 treated conditions were compared and analyzed. It is found that the T6 heat treatment plays different roles in affecting the hardness and the Young’s modulus of alloy phases. This study also found that the T6 heat treatment would influence the failure modes of the alloys. The mechanisms of crack propagation in the as-cast and T6 treated alloys were also analyzed and discussed.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次