| AIMS Materials Science | |
| Vapor phase polymerization of PEDOT on silicone rubber as flexible large strain sensor | |
| Mengying Xie1  Timothy Giffney1  Kean C Aw1  Manon Sartelet2  | |
| [1] Department Mechanical Engineering, University of Auckland, New Zealand;Department of Materials Engineering, ENSICAEN, CAEN, Franc; | |
| 关键词: flexible large strain gauge; poly(3,4-ethylenedioxythiophene); vapor phase polymerization; | |
| DOI : 10.3934/matersci.2015.4.414 | |
| 来源: DOAJ | |
【 摘 要 】
This paper presents a flexible large strain sensor made from ethylenedioxythiophene deposited on silicone rubber (Ecoflex® 00-30) via vacuum assisted vapor phase polymerization (VPP) process. EDOT was used due to its stability when exposed to the atmosphere. VPP is a very simple process requiring only a vacuum bell jar and a vacuum pump. Ferrite chloride (FeCl3) dissolved in tethrahydrofuran was used as the oxidant to make the resulting poly(3,4-ethylenedioxythiophene) (PEDOT) conductive. THF was used because it swells Ecoflex® for better infusion of oxidant and PEDOT adherence. The sensor performs reliably up to 80% strain with a gauge factor of ~2.4 and small hysteresis.
【 授权许可】
Unknown