Fundamental Numerical Analysis of a Porous Micro-Combustor Filled with Alumina Spheres: Pore-Scale vs. Volume-Averaged Models

Applied Sciences

Jun Li¹  Jiansheng Wang¹  Qingqing Li¹  Junrui Shi² 

[1] Key Laboratory of Efficient Utilization of Low and Medium Grade Energy, Ministry of Education, Tianjin University, Tianjin 300350, China;School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255000, China;

关键词: micro-combustor;    porous media;    numerical simulation;    alumina sphere;    pore-scale model;    volume-averaged model;   

DOI  :  10.3390/app11167496

来源: DOAJ

【 摘 要 】

Inserting porous media into the micro-scale combustor space could enhance heat recirculation from the flame zone, and could thus extend the flammability limits and improve flame stability. In the context of porous micro-combustors, the pore size is comparable to the combustor characteristic length. It is insufficient to treat the porous medium as a continuum with the volume-averaged model (VAM). Therefore, a pore-scale model (PSM) is developed to consider the detailed structure of the porous media to better understand the coupling among the gas mixture, the porous media and the combustor wall. The results are systematically compared to investigate the difference in combustion characteristics and flame stability limits. A quantified study is undertaken to examine heat recirculation, including preheating and heat loss, in the porous micro-combustor using the VAM and PSM, which are beneficial for understanding the modeled differences in temperature distribution. The numerical results indicate that PSM predicts a scattered flame zone in the pore areas and gives a larger flame stability range, a lower flame temperature and peak solid matrix temperature, a higher peak wall temperature and a larger R_p-hl than a VAM counterpart. A parametric study is subsequently carried out to examine the effects of solid matrix thermal conductivity (k_s) on the PSM and VAM, and then the results are analyzed briefly. It is found that for the specific configurations of porous micro-combustor considered in the present study, the PSM porous micro-combustor is more suitable for simplifying to a VAM with a larger Φ and a smaller k_s, and the methods can be applied to other configurations of porous micro-combustors.

【 授权许可】

Unknown